What this certificate certifies
This is the EU type-examination certificate (Module B of Regulation (EU) 2016/425) for model 881. It is the document a customs officer, a distributor or a site HSE manager asks for when a pair is sold in the EU with the CE mark on the tongue.
TÜV Rheinland tested the submitted samples against EN ISO 20345:2022+A1:2024 and recorded them as class SB PL. The certificate runs from 2025-10-23 to 2030-10-22 and refers to test report CN25OWP7 003.
Components covered by the certificate
| Component | As certified |
|---|---|
| Toe cap | Steel toe cap FT802D — 200 J impact, 15 kN compression |
| Penetration insert | Kevlar — 1,100 N penetration resistance (the “PL” in SB PL) |
| Outsole | Rubber outsole, design A |
| Size range | EU 38-46 |
SB PL, in plain terms
- SB — the base safety class: 200 J toe cap impact and 15 kN compression.
- PL — penetration resistance achieved with a non-metallic insert. Kevlar instead of a steel plate: same 1,100 N protection, no cold bridge and no metal detector trigger.
How to verify it
The certificate can be checked against TÜV Rheinland’s certificate database using the registration number BP 50698718 0001. The PDFs on this page — the two-page certificate, test report CN25OWP7 003 and the EU declaration of conformity — are the exact files issued to us.
Validity and changes
The certificate stays valid as long as the certified construction does not change. Any change to the toe cap, the Kevlar insert, the outsole compound or the last has to be notified to TÜV Rheinland and approved before the pair can be shipped as certified product.
Certificate pages
The document as issued — click any page to open the full PDF.
English
Español
Русский
العربية