892 — EU Type-Examination Certificate (EN ISO 20345)

What this certificate certifies

This is the EU type-examination certificate (Module B of Regulation (EU) 2016/425) for model 892. It is the document a customs officer, a distributor or a site HSE manager asks for when a pair is sold in the EU with the CE mark on the tongue.

TÜV SÜD Danmark tested the submitted samples against EN ISO 20345:2022+A1:2024 and recorded them as class SB PL, category II. The certificate is valid until 2031-07-29 and is tied to evaluation report DK-PPE002728 TRF i01.

Components covered by the certificate

SB PL, in plain terms

• SB — the base safety class: 200 J toe cap impact and 15 kN compression.
• PL — penetration resistance achieved with a non-metallic insert. Kevlar instead of a steel plate: same 1,100 N protection, no cold bridge and no metal detector trigger.
• Category II — intermediate risk, so the CE mark is applied under Module B type examination plus Module C2/D supervision of production.

How to verify it

The certificate can be checked against TÜV SÜD’s public certificate register at tuvsud.com/ps-cert using the number DK-PPE002728 i01. The two PDFs on this page — the certificate itself and its annex — are the exact files issued to us; the annex lists every material and the test reports behind the approval.

Validity and changes

The certificate stays valid as long as the certified construction does not change. Any change to the toe cap, the Kevlar insert, the outsole compound or the last has to be notified to TÜV SÜD Danmark and approved before it can be shipped as certified product. That is why the materials list on this page matches the annex line for line.

Certificate pages

The document as issued — click any page to open the full PDF.